Staircase timer ASO-203 24 V

Staircase timer serves to keep switched-ON lighting of staircase, corridor, or any other object for the set time and to switch-OFF this lighting automatically, upon elapse of this set time.
With anti-blocking function. Supply 24 V AC. To substrate. 16 A.

Illuminated buttons
Due to the low supply voltage, illuminated buttons should not be used.

Maximum load current
The contact current given in the technical data is the maximum value and may be subject to restrictions – more information. If the information provided indicates that the relay in the device is insufficient, it is recommended to use an external switching element (e.g. contactor) adapted to switch large surge currents.

Anti-blocking function
The anti-blocking function does not allow the lighting to remain on continuously after the staircase switch is blocked, i.e. after the switch is blocked (e.g. with a match), the automatic device will measure the set time and turn off the lighting. The lighting can be switched on again after the blocking is removed.

Ask Price!

SKU: ASO-203 Category: Staircase timers

Functioning
Turned ON staircase timer supports the lighting during set time by potentiometer (from 0,5min. to 10min.). After passage of set time timer will switch OFF the lighting automatically. After switching OFF the lighting there is possibility to switch it ON again.

Counter-blockade function does not allow for continuous illumination lighting, after blocking the switch, (eg by using the match). Appliance will measure the desired time and turns off the lighting. Re-attach the lighting can be made after the removal of the lock.
Attention!
ASO-202 is adapted to co-operate with pushbuttons equipped with neon lamp.

Attention!
ASO-203 is not compatible with pushbuttons equipped with neon lamp.

Attention!
There is possibility of a special implementation of automatic voltage twilight other than those indicated in the table of technical data, such as 12 V, 24 V, 48 V and 110 V AC/DC and others.

Reference ASO-203