Functioning
The relay works in GSM 900/1800 cellular networks of any gsm network operator (device is unlocked). In order to make the calls and execute the predefined functions, the device must have an active SIM card. The relay has two controllable relay outputs through which the controlled receivers are enabled and disabled as well as two high-voltage inputs through which are implemented functions of the notifications about the actuation of controlled devices. Commands and notifications are defined text messages (SMS) exchanged between the controller and the user of the telephone.
Features
* 4 ON/OFF control outputs (8 A 250 V AC)
* time control of the outputs, for example for 30 s (1 s÷600 min.)
* 4 alarm inputs (160÷260 V AC of direct connection)
* optional triggering with both the appearing and fading of the signal (0/1)
* notifications to 5 phone numbers for each input
* queries about the status of inputs and outputs
* redefinition of the names of inputs and outputs, for example: IN1-> PUMP; IN2-> BREAK-IN
* optional automatic replies about execution of the commands
* optional automatic restore of the status of the outputs after power returns
* access control by password
* unlocked (no Simlock blockade)
Notes on SIM card
SIM card of the P04 relay:
* It is recommended to use the SIM card with the so-called telemetric tariff / m2m. Ask at the GSM operator!
* The first activation of the SIM card of the controller should be made on any phone of the user (send SMS or make a voice call).
* Clear the memory of the inbox.
* In case of the usual tariff (not telemetric), it is recommended to turn off any additional operator services assigned to the SIM card, for example free text message alerts, voice mail, operator IVR voice menu for free notifications, etc.
* First run of the SIM card on the relay may take several minutes. This is due to the registration of the unknown device model and finding the correct configuration of the system by the operator.
SIM of the user’s phone:
* Set the input mode of the text messages as TEXT (not UNICODE)!
By default, the GSM operators set the TEXT mode. If the relay ignores text messages you should check the settings and adjust them correctly.
Technical support
phone +48 885048500
