SHUTTER – is a roller shutter or shutter controller with the possibility of smooth control of the slats. Thanks to the active power measurement function, it is not necessary to manually calibrate the roller shutter movement times *. The application allows you to perform “quick steps”, ie raise – lower, and to set the slat angle of the shutter to -90 ᣞ➱ 0 ᣞ➱ 90 ᣞ. In the case of the blinds, after they are lowered or raised, the controller sets the slats to the angle in which the slats were located a moment earlier.
Application for phones and tablets
Remote access via Wi-Fi and F&F cloud
Voice control
Programming using calendars
Smooth control of the angle of the slats in the blinds
Properties
- Control of a single roller shutter with a 230 V AC motor with a load of up to 320 W;
- Ability of local connection of one or two buttons for direct control of the roller shutter operation;
- Controlling the level of the roller shutter opening and ability to control the degree of the slat tilt;
- Set the desired level of roller shutter opening and slat tilt using the mobile app and time programmers;
- Built-in clock with power backup and backup copy of the work program guarantees proper operation also without a Wi-Fi connection;
- REST API support enabling integration of the controller also with other home automation systems;
- Electric protection of the roller shutter motor;
- Built-in thermal protection;
- Convenient installation in an installation box with a diameter of fi 60 mm.
FOX – Wi-Fi control system
Easy to install and rich in possibilities, wireless home automation system.
To control devices, the FOX system uses a free mobile application, which is available for devices with iOS and Android systems.
The application allows you to manage the installed modules in a simple and intuitive way. Thanks to the use of the home Wi-Fi network and the F&F cloud, you have the ability to constantly control devices at home from anywhere in the world with Internet access.
If you do not want to control your Fox system from outside your home, you can choose not to use the F&F cloud and still fully enjoy the functional control that works only over your local Wi-Fi or Bluetooth network.
Tips
Illuminated buttons
Due to the low supply voltage, illuminated buttons should not be used. Maximum load current The contact current given in the technical data is the maximum value and may be subject to restrictions – more information . If the information provided indicates that the relay in the device is insufficient, it is recommended to use an external switching element (e.g. contactor) adapted to switch large surge currents. State memory The relay version with the letter “M” has a contact position memory, i.e. after the power is turned on, the relay state that was at the time of the power cut will be restored.
