F&Wave is a family of wireless devices controlled by radio with a range of up to 100 meters*. The receivers are available in either a DIN-rail mounting version (housing 1S) or a Ø60 flush-mounted version. The transmitters are available as handheld remote controllers or as a flush-mounted version. The receivers relay control signals. The device that receives a control signal from the transmitter will automatically send it forward, which allows to increase the range of the remote control.
Features of the module
* Single bistable relay;
* Cooperation with remote control transmitters of the F&Wave system;
* The ability to control from up to 8 transmitters with single receiver;
* Local control – the ability to directly control the relay using any monostable button (for example: bell button);
* Separated output contact NO with load capacity of 8 A (AC-1);
* Small enclosure size;
* Screw terminals for easy installation in a Ø60 flush-mounted box;
* Retransmission of commands from the transmitter – the ability to increase the range of the remote control;
* Low power consumption – low operating cost;
* Built-in electronic thermal protection to prevent damage in case of excessive load of the controller.
Operating range
In an open space without any interfering factors the range of the devices controlled by radio fluctuates within the limits of 100 m. The range can be improved by direct retransmission of modules located in mutual coverage area.
Devices of the F&Wave system
Transmitters | Receivers | Box Ø60 |
DIN rail |
flush-mounted | Single relay | FW-R1P | FW-R1D |
FW-RC5 | Double relay | FW-R2P | FW-R2D |
remote controls | Universal dimmer | FW-D1P | FW-D1D |
FW-RC4 | Roller-blind controller | FW-STR1P | FW-STR1D |
FW-RC10 | Two-channel LED controller | FW-LED2P | FW-LED2D |