Functions
* control panel, enabling programming and the monitoring of device operation
* T input for DC signal and AC signal 50 Hz
* counting time upwards without threshold value
* ‘downward’ counting mode to the selected value with zero value signaling (e.g. 9999 →0)
* counting working time with high state (constant voltage) at the T input
* counting working time between two pulses given at the T input
* counting time upwards to the selected threshold value
* external RESET input
* relay output signaling the preset meter state (contact1C/O 8A )
* relay action selection: pulse with set time length; ON→ OFF or OFF→ ON state change
* local and total meter state memory after supply failure
* limiting access to program menu using PIN code
* setting display illumination mode
* program menu in three languages: Polish, English or Russian
Working time meter CLG-03
Programmable, multifunction electronic meter.
CLG-03 is a programmable, multi-function electronic meter, enabling the counting of working hours of the connected devices or systems in 1 to 999 999 range, corresponding to 114 years of operation. Working time is counted according to an individual program, set by the user. After reaching the limiting value, the meter will configure itself according to individual user’s needs.
Reference CLG-03
- Type
- work time counter
- Power supply voltage
- 24÷264 V AC/DC
- Communication interface
- NONE
- The executive element
- relay
- Maximum load current
- 8 A
- Contact configuration
- 1 × NO/NC
- RESET input - voltage
- 10÷264 V AC/DC
- Counting input - voltage
- 10÷264V AC/DC
- The maximum value counted
- 999999
- Terminal
- pluggable terminal blocks 4,0 mm²
- Tightening torque
- 0,5 Nm
- Power consumption
- 1,5 W
- Working temperature
- -20÷50°C
- Dimensions
- 3 modules (52,5 mm)
- Assembly
- on rail 35 mm
- Ingress Protection Marking
- IP20
Related products
