The rH-TSR1S2 module is a combination of a three-state relay and two contact inputs. The module sends information about closing or opening of the contacts to the system and controls the relay, which might activate bi-directional electrical receivers. Communication with the server is done via radio. The module has two physical inputs for connecting two momentary potential-free buttons, and two relay outputs. The relay is designed to work with resistive, inductive or capacitive load of the contacts, both in DC and AC circuits. The rH-TSR1S2 is particularly suitable for controlling roller blinds (change of motor operation direction) and other devices where you cannot simultaneously activate two circuits.
AUTONOMOUS MODE:
If the module is disconnected from the server, it goes into autonomous mode. Holding down the button connected to contact 1 or 2 switches respectively the first (up) or the second (down) output, and releasing the button turns them off.
Conditions for autonomous mode to activate:
1. Correct connection of S1 and S2 contact with the button
2. Option Offline: autonomous mode is enabled in the Installer settings.
The rH-TSR1S2 module is represented by an object, which consist of two binary inputs and two binary outputs (bistate), separate for each physical input. Closing or opening of the contact causes a change in logic state of the corresponding output. Input of the object is used for controlling the channels of the. The element also has two binary inputs and two binary outputs (bistate), separate for each physical input. Closing or opening of the contact causes a change in logic state of the corresponding output.
