Pulse meter CLI-02

Programmable, multifunction electronic meter.
CLI-02 is a programmable, multifunction electronic meter enabling the counting of external pulses in 0 to 99 999 999 range (or using an internal divider up to 99 999 999 999). Pulses are counted according to an individual program, set by the user. After reaching the limiting value, the meter will configure itself according to individual user’s needs.

Ask Price!!

SKU: CLI-02 Category: Time impulse meters

Functions
* control panel, enabling programming and the monitoring of device operation
* T input, adapted for operation with AC/DC signal, 5 to 264V amplitude and 50 Hz frequency for AC and 5kHz for DC signals
* possibility to set THRESHOLD parameter (1÷99 999 999 range), specifying the limiting number of pulses counted in a single operation cycle
* ‘downward’ counting mode to the selected value with zero value signaling (e.g. 9999→ 0)
* selection of input pulse edge (leading or trailing) the counter will react to
* external RESET input
* possibility of automatic local counter reset (loop mode) with possibility to set selected relay action
* relay output signaling the preset meter state (contact1C/O 8A)
* relay action selection: pulse with set time length; ON OFF or OFF ON state change
* local counter, reset using the external reset input or using RESET button
* total counter for all impulses (loop mode 0 → 99 999 999 → 0 → … or reset using the meter configuration menu)
* digital filter, enabling the limiting of maximum frequency of the counted pulses (in order to reduce interferences on meter input)
* local and total meter state memory after supply failure
* scaling pulse values according to set multiplier or divider
* limiting access to program menu using PIN code
* setting display illumination mode
* program menu in three languages: Polish, English or Russian