Four – channel 0 – 10 V controller

The module has four local inputs to connect buttons operating in the same way as in dimmers (short press switches on/off, longer press changes the output value from 0 to 10 V). It is possible to control each channel independently using a touch panel. The module requires a 24 V system power supply. To expand its functionality, the module has relays built-in, which are used to cut off the power supply voltage of receivers, for which the value of less than 1 V has been set. This functionality is useful in the case of receivers that cannot be switched off by setting the minimum voltage (for example, the lighting is glowing).