Old and traditionally operated electrical installations do not mean that there is no need to give up the convenience of remote lighting control. Multifunctional radio relays, one-channel FW-R1P-NN and two-channel FW-R2P-NN are mounted in a box under the button. The relays are connected in series with the controlled load, which means that their operation does not require leading the neutral wire to the switch box.
The FW-R1P-NN and FW-R2P-NN single-channel relays cooperate with the F&Wave radio remote control transmitters and local buttons. They allow you to control receivers with a total power from 5 to 1000 W (**)
Performed functions:
• Bistable
• Timer – from 1 second to 48 hours.
• Monostable
• Enable – centralized control
• Turn off – centralized control
The design of the receivers allows each receiver channel to be associated with 32 different transmitters.
Local control – the relay can be controlled with any button. Local inputs can be assigned to any relay function.
(**) In case of work with low-power LED lamps, it is recommended to additionally use FW-BYPASS-NN connected in parallel to the controlled lamp.
Does the F&Wave radio control system only control lighting?
F&Wave is a radio remote control system not only for lighting (switching on, switching off, also adjusting the brightness of the light using F & Wave dimmers).
F & Wave system devices can also be used to control roller shutters, awnings, shutters, entrance gates and other devices.
