The result is scaled according to the linear characteristic set by the user.
The device is equipped with Modbus RTU bus that allows to remotely configure and read the measured parameters. The module is enclosed in a 36×72 mm panel casing with a 14 mm
display in the front part. Additionally, on the front panel there are LEDs indicating the current status of alarm outputs and one LED that indicates Modbus communication. The buttons are used for local configuration of the device parameters.
Panel signal transducer PA-02-MBT
The PA-02-MBT is a 0÷20 mA/ 0÷10 V panel signal transducer with the possibility of setting two independent alarms that control two relays.
Reference MAX-PA-02-MBT
- Type
- przetwornik sygnałów
- Power supply voltage
- 9÷30 V AC/DC
- Contact configuration
- 2 × NO/NC
- Separation of the contact
- YES
- Wejście pomiarowe
- separowane 0÷20 mA/0÷10 V
- Histereza alarmów
- 1÷9999
- Dolny próg alarmów
- -999÷9998
- Górny próg alarmów
- -998÷9999
- Opóźnienie alarmów
- 0 s÷180 s
- Display
- 4-digit LED (height figures 14 mm)
- Accuracy of measurement
- 1%
- Communication protocol
- MODBUS RTU
- Baudrate
- 1200÷115200 bit/s
- Data bits
- 8
- Stop bits
- 1 lub 2
- Bits of parity
- EVEN / ODD / NONE
- Address
- 1÷247
- Load current of the relay
- 6 A
- Power consumption (max)
- 100 mA
- Terminal
- pluggable terminal blocks 1,5 mm²
- Tightening torque
- 0,4 Nm
- Working temperature
- -10÷40°C
- Dimensions
- 72 mm x 72 mm x 92 mm
- Mounting hole
- 66 mm × 66 mm
- Assembly
- Front of control cabinet
- Ingress Protection Marking
- IP20
Related products
