F&Wave is a family of wireless devices controlled by radio with a range of up to 100 meters*. The receivers are available in either a DIN-rail mounting version (housing 1S) or a Ø60 flush-mounted version. The transmitters are available as handheld remote controllers or as a flush-mounted version. The receivers relay control signals. The device that receives a control signal from the transmitter will automatically send it forward, which allows to increase the range of the remote control.
Features of the module
* 4-button remote control transmitter powered from 230 V;
* cooperation with remote control transmitters of the F&Wave system;
* ability to control any number of receivers;
* on/off functionality (bi-stable switch) with receivers: FW-R1P, FW-R1D, FW-R2P, FW-R2D, FW-D1P, FW-D1D, FW-LED2P, FW-LED2D;
* raise/lower the roller blind with receivers FW-STR1P, FW-STR1D;
* dim/brighten the lighting with receivers FW-D1P, FW-D1D, FW-LED2P, FW-LED2D;
* ability to change the configuration of the S1 input to ON – always switch on the paired receivers and/or raise the roller blind;
* ability to change the configuration of the S2 input to OFF – always switch off the paired receivers and/or raise the roller blind;
* small enclosure size;
* screw terminals for easy installation in a Ø60 flush-mounted box;
* low power consumption – low operating cost.
Operating range
In an open space without any interfering factors the range of the devices controlled by radio fluctuates within the limits of 100 m. The range can be improved by direct retransmission of modules located in mutual coverage area.
F&Wave system devices
Transmitters | Receivers | Ø60 box |
DIN rail |
flush-mounted | Single relay | FW-R1P | FW-R1D |
FW-RC4-AC, FW-RC5 | Double relay | FW-R2P | FW-R2D |
remote controls | Uniwersal dimmer | FW-D1P | FW-D1D |
FW-RC4, FW-RC10 | Roller blind controller | FW-STR1P | FW-STR1D |
wall buttons | Dual-channel LED controller | FW-LED2P | FW-LED2D |
FW-WS1, FW-WS2, FW-WS3 |