Functioning
The operation time and required temperature are achieved according to the individual program set by the user. The CRT controllers are equipped with a calendar and a real time clock which enable switching the controlled device on and off at preset hours within the following cycles: 24-hour, weekly, business-day (Mon. Fri.) or weekend (Sat., Sun.).
Functions
*control panel for programming and monitoring;
*operation modes: HEATING and COOLING to maintain a preset temperature according to programmed hours and days;
*CONTINUOUS operating mode to maintain a single preset temperature value while ignoring other program entries;
*MEASUREMENT operating mode display of an actual temperature value without controlling a connected machine;
*50 program entries;
INTERVAL this feature enables the user to program up to 8 required temperature values (3 in the MY1, MY2 and MY3 modes, and an additional 5 in modes called MORNING, WORK, DINNER, DAY, and NIGHT for everyday time windows related to the users’ lifestyle;
*DELAY programmable time of response delay while exceeding limit temperature values;
*CORRECTION related to the temperature read-out error against the model thermometer;
*SENSORS visual signalisation of the temperature sensor failure;
*DST automatic DST time implementation with programmable shift to manual mode;
*LIGHT selection of display illumination mode.
*LANGUAGE program menu in three languages: Polish, English or Russian
Attention!
The probe is in set with temperature regulator.
