Functions
* the control panel enables programming and monitoring the device operation
* the breaker switch located on the front panel enables switching off the power supply of the whole heating system
* maintaining a preset temperature in accordance with programmed hours and days of the week
* possibility of programming 4 intervals of a required temperature per 24 hours
* 12 program entries: 4 entries concerning the required temperature for working days (Pn-Pt: Monday through Friday); 4 entries concerning the required temperature for Saturday (So: Saturday) and 4 entries concerning the required temperature for Sunday (Nd: Sunday)
* possibility of a quick, manual correction of the currently maintained temperature
* adjustable hysteresis
* 2 temperature sensors: an internal one and an external one
* 3 operation modes of the regulator: operation with the internal temperature sensor; operation with the external temperature sensor; operation with two temperature sensors
* in the mode of operation with two temperature sensors, the external sensor is the limiting one with an adjustable temperature within the range of 15÷50°C
Attention!
The probe is in set with temperature regulator.
Temperature regulator RT-825
Weekly programmer. Temperature range: 5÷60ºC.
RT-825 temperature regulator is designed for direct control of heating devices fed by a voltage of 230V, maximum current of less than 16A.
Reference RT-825
- Power supply voltage
- 230 V AC
- The executive element
- relay
- Maximum load current
- 16 A
- Contact configuration
- 1 × NO
- Separation of the contact
- NO
- Temperature regulation range
- 5÷60°C
- Hysteresis
- 1°C
- Accuracy of setting
- 1°C
- Accuracy of measurement
- ±1°C
- Time of clock operation
- 1 h
- Temperature probe
- RT45
- Reading accuracy
- 0,1°C
- Internal temperature sensor
- NTC
- Terminal
- pluggable terminal blocks 1,5 mm²
- Tightening torque
- 0,4 Nm
- Power consumption
- 0,8 W
- Working temperature
- -10÷50°C
- Dimensions
- front: 86×86 mm; gł.22 mm, tył: Ø60; gł.27,5 mm
- Assembly
- in a flush-mounted box Ø60
- Ingress Protection Marking
- IP20
Related products
