Functions
* possibility of programming 1 required temperature
* the knob located on the front panel enables setting a required temperature
* the breaker switch located on the front panel enables switching off the power supply of the whole heating system
* the input for connecting a control clock
* signalling of the heating system activation
* 2 temperature sensors: an internal one and an external one
* 3 operation modes of the regulator: operation with the internal temperature sensor; operation with the external temperature sensor; operation with two temperature sensors
* in the mode of operation with the internal temperature sensor: in case of the failure of the temperature sensor the regulator will shift to the so-called safe automatic model and will try to maintain the temperature set
* automatic switching over to the mode of operation with the internal temperature sensor in case of a failure of the external sensor
* in the mode of operation with two temperature sensors, the external sensor is the limiting one and it does not permit the temperature of 27°C to be exceeded regardless of the temperature set by means of the temperature adjusting knob
* in the mode of operation with two temperature sensors: if both temperature sensors fail, the regulator will shift to the so-called safe automatic model. Working with interruptions, the regulator will try to maintain the temperature at the level of 80% of the set temperature.
Attention!
The probe is in set with temperature regulator.
